|
|
|
|
Products > Fan
|
S -SCS series (S) |
  |
Fans for clean or low dust content air, suitable for small suction and
ventilation plants, for cooling of electric devices, motors and machine tools.
The fans are provided with a directly coupled asynchronous three-phase motor (a single-phase motor on request),
forward blades impeller, and a casing in galvanized sheet iron.
Capacity from 60 to 2100 m3/h.
Total pressure from 5 to 120 daPa.
Max temperature of the carried air is 90°C. |
|
SC - SCK series (SC) |
  |
Fans for clean or low dust content air, suitable for medium-sized suction
and ventilation plants with low load loss, like premises air extraction and/or vapour suction from industrial catering cooker
hoods. The fans are provided with a directly coupled asynchronous three-phase motor, forward blades impeller, and a casing in
galvanized sheet iron.
Capacity from 480 to 2.200 m3/h.
Total pressure from 15 to 127 daPa.
Max temperature of the carried air is 90°C. |
|
SCL - SCLK series (SCL) |
  |
Fans for nonhumid clean or low dust content air and fumes conveying,
suitable for suction and ventilation plants with medium load loss. The fans are provided with a directly coupled asynchronous
three-phase motor, backward aerofoil aluminium blades impeller, and a casing in thick galvanized sheet iron.
Capacity from 180 to 38.000 m3/h.
Total pressure from 20 to 600 daPa.
Max temperature of the carried air is 80°C. |
|
SFL - SFLK series (SFL) |
|
Fans for humid clean or low dust content air and for fumes conveying,
suitable for suction and ventilation plants. On request, for conveyance of air with high moisture concentration the fans
will be provided with welded casing and condensate drain. The fans are provided with a directly coupled asynchronous
three-phase motor, backward constant-profile aluminium blades impeller in welded steel, and a casing in thick galvanized sheet iron.
Capacity from 180 to 38.000 m3/h.
Total pressure from 20 to 600 daPa.
Max temperature of the carried air is 80°C, for temperature values up to 170°C
the fans will be provided with welded casing, extended shaft motor, spacer and
cooling fan, and will be varnished with high-temperature aluminium paint. |
|
SCRK series (SCRK) |
|
Fans for nonhumid clean or low dust content air and fumes conveying, suitable
for big suction and ventilation plants with medium load loss.
The fans are
provided with a directly coupled asynchronous three-phase motor, backward
aerofoil aluminium blades impeller, and a casing in thick galvanized sheet iron.
Capacity from 2000 to 60.000 m3/h.
Total pressure up to 400 daPa.
Max temperature of the carried air is 80°C. |
|
SCRKT series (SCRKT) |
 |
Belt driven fans that have the same typology and employment of SCRK series.
Capacity from 1.500 to 120.000 m3/h.
Total pressure up to 600 daPa.
Max temperature of the carried air is 80°C. |
|
SLPT series (SLPT) |
 |
High output centrifugal fans suitable for the suction of dust, fume, granulate,
sawing or wood shavings of minimum size and other materials generally mixed with air, filament materials excluded. The fans are normally
used in carpenter shops, foundries, tanyards, mechanical and molinary industries, cement factories and in any other application requiring
high capacities and medium pressure The fans are provided with a belt driven asynchronous three-phase motor, backward constant-profile
blades impeller in welded steel, and a casing in thick galvanized sheet iron.
Capacity from 4.000 to 120.000 m3/h.
Total pressure from 200 to 800 daPa.
Max temperature of the carried air is 90°C, for temperature values up to 350°C the fans
will be provided with a special cooling fan and will be varnished with high-temperature aluminium paint. |
|
SR series (SR) |
 |
Fans suitable for clean or low dust content air in pneumatic conveyance plants. The fans
are normally used in the mills, pasta factories, in metallurgical, iron and chemical industries, and in other applications requiring high
capacities and medium and high pressure. The fans are provided with a directly coupled asynchronous three-phase motor, backward blades impeller
in welded steel, and a casing in thick galvanized sheet iron.
Capacity from 120 to 54.000 m3/h.
Total pressure from 200 to 2.000 daPa.
Max temperature of the carried air is 80°C, for temperature values up to 150°C the fans will
be provided with a cooling fan and will be varnished with high-temperature aluminium paint. |
|
SR_N8 series (SRN) |
 |
Fans with direct control by means of a semi elastic joint, suitable for the conveyance of
fumes and dust mixed to the air and in other applications requiring high capacities and medium and high pressure. This series has been designed
to obtain the maximum sturdiness and low noise level. Apart from that, the fan/motor connection made by means of joint eliminates the radial
and axial thrust on the motor supports, in this way assuring the motor's longer operation. The fans are provided with an asynchronous three-phase
motor coupled by means of elastic joint, forward blades impeller in welded steel, and a casing in thick galvanized sheet iron.
Capacity from 2.400 to 150.000 m3/h.
Total pressure from 400 to 1.800 daPa.
Max temperature of the carried air is 90°C, for temperature values up to 350°C the fans will
be provided with a cooling fan and will be varnished with high-temperature aluminium paint. |
|
SP series (SP) |
|
Fans suitable for clean or high dust content air in pneumatic conveyance plants or for combustion
air of gas burners. The fans are normally used in the mills, pasta factories, in metallurgical, iron and chemical and in other applications requiring
low capacities and medium and high pressure. The fans are provided with a directly coupled asynchronous three-phase motor and a forward blades impeller
in welded steel, and a casing in thick galvanized sheet iron.
Capacity from 120 to 28.000 m3/h.
Total pressure from 200 to 2.000 daPa.
Max temperature of the carried air is 80°C, for temperature values up to 150°C the fans will be provided
with a cooling fan and will be varnished with high-temperature aluminium paint. |
|
